Posted on

3 Steps to Remove Scratches from Glass by Glass Scratch Remover Kit

You can remove scratches from glass easily by using advanced UerGlass Glass Scratches Remover Kit in minutes.

No need compound. No more mess.

Save money, Save Time.

Windows, tabletop, counter or other glass surfaces easily become scratched. Instead of replacing glass, it is much more convenient to remove scratches by using our 2019 advanced glass scratch remover kit.

There are three steps to remove scratches from glass.

Step 1:

use the speed-adjustable Angle Grinder and the coarse abrasive disc (blue backed velour) to perform coarse grinding. Note that the abrasive pad must be flat on the glass, and the speed should be adjusted at about 2500-3000rpm. When the scratches are gone and it turns out lots of glass powder, please turn to next step.

Step 2:

After coarse grinding is completed, it shall be replaced with a Fine abrasive disc (green backed velour) for fine grinding. During the operation, please note that the grinding area should be larger than the coarse grinding area to prevent any distortion. In order to ensure the highest effectiveness of grinding, the glass powder on the sanding pad should be removed in time during the operation.

Step 3:

Replace with a Polishing Pad (red backed velour), turn to a speed of 5000rpm and spray water before polishing. Polish from down to up. During the polishing process, spray water continuously and observe the polishing effect at the same time. When the glass turns out gloss it is completed.

Uerglass Advanced Glass Scratch Remover Kit can be used on any typed of glass surface such as tempered glass, toughened glass, commercial glass.

Uerglass Advanced Glass Scratch Removal Kit can remove light to heavy scratches, acid etching, sandpaper scratches, graffiti scratches, grinder damage, welder splatter etc.

If you need more information about the glass scratch remover kit, please contact us or visit directly.

Please follow and like us: