It is easy to use UerGlass Advanced Glass repair kit to remove mildew and mold on glass.
If the mildew and mold grow on glass within 15 days, then just use our patented polishing pads and water to get your glass glossy again.
Just spay water onto glass and use our patented polishing pad with a speed of 5000 rpm to polish the mildew area.
If the mildew and mold has been more than 15 days and are deep into glass. Then there are three steps to clean mildew and mold off.
Step 1: use the coarse abrasive disc (blue backed velour) to perform coarse grinding with a speed of 2500-3000rpm. When the scratches are gone and it turns out lots of glass powder, please turn to step 2.
Step 2: replace with a Fine abrasive disc (green backed velour) for fine grinding. The grinding area should be larger than the coarse grinding area to prevent any distortion.
Step 3: Replace with a Polishing Pad (red backed velour), turn to a speed of 5000rpm and spray water before polishing. When the glass turns out gloss it is completed.
